Peanut shell pellet mill sometimes occurs abnormalities in production, the most common is the material is uneven, affecting the normal production activities, But why does it happens? What we should do when it appears? I hope the following answers can help you.
Peanut shell pellet mill rotates heavily when gray getting into roller or lubrication is disabled, and leading to press wheel rotational speed unsteadiness, affecting the feed rate. Therefore, the user should always check the working conditions of press wheel, clean the dirt or change lubrication.
After the moisture content of normal production materials are changed, the wet material needs to heat to evaporate the water in order to shape pellet, there is a certain time for water evaporating. Before the water evaporates, the material often very slow, we can solve this problem by reducing the moisture content of the material.
There will be a great influence of material discharge speed if the pellet size is unreasonable, the bulk material gets into mold hole after suppressing again and again. Therefore, adjust the material size until to suitable size.
Discharging unevenly will increase current fluctuations, leading to uneven discharge of material, we need to adjust conditioner blade, so that it can be uniform and stably cutting.
When the bearings and other drive components have a more severe wear, there will be the phenomenon of an uneven feed rate, which requires to replace parts.
If you have any problems or questions about our products or need our support and assistance, please feel free to write us, we will reply to you within 24 hours, and never reveal your information to the third party. Thank you!
This wood pellet production line can not only process wood chips and sawdust...
